Skip to content
spilma

ATEX type n: 2019 edition cited, 2010 edition out in 2028

Commission Implementing Decision (EU) 2026/2480 was adopted on 9 November 2026 and published in the Official Journal on 10 November. It amends Implementing Decision (EU) 2022/1668, the list of harmonised standards under ATEX Directive 2014/34/EU, for one standard: type of protection "n". The revised EN IEC 60079-15:2019, as amended by EN IEC 60079-15:2019/A11:2026, confers presumption of conformity from the day of publication. The 2010 edition it replaces stays on the list until its deletion applies on 10 May 2028.

In short:

  • Row 76a is inserted: EN IEC 60079-15:2019 together with EN IEC 60079-15:2019/A11:2026. The decision entered into force on 10 November 2026, the day of its publication.
  • Row 76, EN 60079-15:2010, is deleted, but only from 10 May 2028. Recital 9 gives the reason: manufacturers need time to prepare for the new standard.
  • EN IEC 60079-15:2019 is IEC 60079-15:2017 approved by CENELEC without modification. That IEC edition removed type of protection "nA" from part 15.
  • This is the second EN 60079 part replaced on the ATEX list this autumn. Decision (EU) 2026/1967, published on 4 September 2026, did the same for part 28 (optical radiation).

The Annex to the decision has two points, and Article 2 gives them different dates.

Row of Decision 2022/1668 Reference Status
76 EN 60079-15:2010 (IEC 60079-15:2010) Deleted by point (1) of the Annex, which applies from 10 May 2028
76a EN IEC 60079-15:2019 and EN IEC 60079-15:2019/A11:2026 Inserted by point (2), applicable since 10 November 2026

The new row cites the 2019 edition together with its A11:2026 amendment. Recital 5 states that it is the standard as amended by A11:2026 that satisfies the requirements of Annex II to the Directive, so the citation covers the combination, not the 2019 text on its own.

Until 10 May 2028, both rows are in the list and both confer presumption of conformity for the essential requirements they cover. From that date, only the 2019 edition with A11:2026 does.

What changed between the 2010 and 2019 editions

Section titled “What changed between the 2010 and 2019 editions”

The endorsement notice of EN IEC 60079-15:2019 states that the text of IEC 60079-15:2017 was approved by CENELEC as a European Standard without any modification, and that the EN supersedes EN 60079-15:2010. The IEC catalogue describes the 2017 edition as a technical revision of the 2010 edition.

The change that matters most for existing designs is the scope. The 2017 edition covers sealed devices, hermetically sealed devices and non-incendive components ("nC"), and restricted breathing enclosures ("nR"). Its foreword lists these changes among others:

  • Requirements for type of protection "nA" (non-sparking) have been removed. The definition of the non-sparking device was dropped because the concept has been transferred to IEC 60079-7.
  • Requirements for enclosed break devices have been removed, the concept being transferred to IEC 60079-1.
  • The scope now allows internal working voltages above 15 kV, for example starters for HID luminaires.

On the receiving side, the foreword of IEC 60079-7:2015 states that the requirements for type of protection "nA" have been relocated from IEC 60079-15 and that the "nA" marking is replaced by "ec". EN 60079-7:2015 with EN IEC 60079-7:2015/A1:2018 is already cited under ATEX, as row 74 of Decision 2022/1668.

In practice, a product assessed as "nA" against EN 60079-15:2010 has no counterpart in the 2019 edition of part 15. Once the 2010 edition leaves the list, presumption of conformity for that kind of protection comes from the increased safety standard, at level "ec".

Implementing Decision (EU) 2026/1967 of 3 September 2026, published on 4 September, inserted row 81a, EN IEC 60079-28:2026 (protection of equipment and transmission systems using optical radiation), and deletes row 81, EN 60079-28:2015, from 4 March 2028. The structure is identical: the new edition is usable at once, and the old one keeps its presumption for about 18 months.

Type "n" is a protection concept for equipment-group II, category 3. Annex ZZ of EN IEC 60079-15:2019 refers to category 3 equipment, and under Article 13(1)(c) of Directive 2014/34/EU that category follows internal production control (Annex VIII). No notified body is involved in that procedure: the manufacturer alone decides which standards it applies, and the EU declaration of conformity refers to them. The ATEX and IECEx guide sets out the categories, zones and procedures.

Harmonised standards remain one voluntary means of conformity; Annex ZZ of the standard says so. A manufacturer that does not apply a cited standard has to include in the technical documentation, under Annex VIII, descriptions of the solutions adopted to meet the essential health and safety requirements, and a list of the other technical specifications applied.

  1. List the products whose technical documentation or EU declaration of conformity cites EN 60079-15:2010. These are the files that lose their presumption basis for that standard on 10 May 2028.
  2. For "nC" and "nR" designs, run a gap assessment against EN IEC 60079-15:2019 with A11:2026. The citation covers the amended text, so assess against both documents.
  3. For "nA" designs, plan the move to EN 60079-7 at level "ec". The 2019 edition of part 15 no longer contains "nA".
  4. Update the declaration of conformity when the standard changes. Point 6 of the model in Annex X to the Directive requires references to the relevant harmonised standards used.
  5. Check optical radiation sources against EN IEC 60079-28:2026, whose predecessor leaves the list on 4 March 2028.

Sources & references

  1. Commission Implementing Decision (EU) 2026/2480 of 9 November 2026, EUR-Lex eur-lex.europa.eu/eli/dec_impl/2026/2480/oj
  2. Commission Implementing Decision (EU) 2022/1668, ATEX standards list, EUR-Lex eur-lex.europa.eu/eli/dec_impl/2022/1668/oj
  3. Commission Implementing Decision (EU) 2026/1967 of 3 September 2026 (EN IEC 60079-28:2026), EUR-Lex eur-lex.europa.eu/eli/dec_impl/2026/1967/oj
  4. Directive 2014/34/EU (ATEX), EUR-Lex eur-lex.europa.eu/eli/dir/2014/34/oj
  5. IEC 60079-15:2017, Edition 5.0 (catalogue entry), IEC webstore.iec.ch/en/publication/33074
  6. IEC 60079-7:2015, Edition 5.0 (catalogue entry), IEC webstore.iec.ch/en/publication/22791